A tiger head heat transfer that not only looks beautiful but pretty realistic too :)

• Size: 61mm wide, 62mm tall
• Ready to iron on
• To be used on denim, cotton and non-stretch fabrics
• Please follow instructions carefully to ensure correct application:

1. Preheat your iron (high heat is necessary to ensure that the patch will adhere to the fabric).
2. Place the patch with the sticky side down onto the garment. Make sure it is exactly where you want it to be.
3. Place the iron onto the design and press firmly. Move the iron around for at least 2 minutes.
4. Slowly remove the transfer film and check the patch around the edges. If there are still parts that did not adhere to the fabric, repeat the steps above until you easily peel the transfer film off the garment